Customers hot line: 020 704 371 53
'Rome' log cabin
'Rome' log cabin
5x3m, 44mm Log cabin, double glazed!

Best selling log cabin!
'Natali' log cabin
'Natali' log cabin
Log cabin 'Natali' 5x3m, 34mm walls More

Common FAQ

Wood characteristics and Log cabins FAQ
Wood has a number of specific characteristics, which are natural and inherent to it. The biggest practical moment is, that the wood has its specific colour and
density, also the effect of humidity result.
In longitudinal cut most of the wood has a nice, decorative and often very appreciable cut-out which is called texture.
Wood has a specific scent. The scent is given by attars, resins and fermented substances. New-mown wood gives a better scent.
A very important attribute of the wood is to store and easily return the water.
The bad
linear measurements and volumes increase.
attribute is to bloat and dry out. When wood is drying, it shrinks its linear measurements and volume decrease. When the wood absorbs humidity its
inside layers. That is why, when the outer layers start to shrink, the inside layers, due to bigger wetness, oppose to drawing. Firstly the surface is chapping, next
the inside. When wood dries it can have longitudinal or cross warp. Longitudinal: When dried straight balk bends, flat plank twists and gets the form of the
propeller. Cross: When the form of woods’ cross-section is changing, quadratic balk becomes the balk with rectangular or rhomb cross-section, flat plank
becomes hunched.
Wood has a number of specific technological characteristics. It easily splits along the fibre, nicely holding metal fastenings, it can flex easily, is durable to
depreciation. Screws hold in the wood extremely well. Screws have a much better grip with the wood than the nails, and they do not cut the strings.
of the wood are that it chaps and warps. When wood dries, humidity firstly evaporates from the surface, outer layers and only after from deeper
Peculiarity of the wood (taints)
origin, is so varied, that the concepts “normal wood” or “subnormal wood” often has a conditional complexion. On sawn-on wood and sawn timber assortment
following fungus taints may occur: mould, brownness. Mould funguses generally do not affect physical and mechanical characteristics of the wood.
When wood is affected by biological (fungus), physical (environmental temperature and humidity) and chemical factors – it decomposes.
Wood may last a long time, but volatile humidity and temperature of the environment reduces its lasting, because of that, a variety of cracks, which can damage
the woods’ integrity ,upspring, that facilitates woods’ infection with fungus, and its rapid development. The older the wood is, the better its timbers durability is.
The most effective way to protect the wood from insect and decay is to soak it with special preparations, which are toxic to fungus and insects, - antiseptics.
: branchy wood, cracks, subnormal structure, infractions made by fungus and insects. Wood, as it is a product of biological

Please call us now 020 704 37153 or view our log cabins special offers at

our expierience

            Assembly FAQ;
                        Walls Below Ground Level;
                        Garage conversion;